GRABO Foam Seal

With continuous usages the seals wear out. When the GRABO seal finally wears out, the lifting capacity diminishes. In this case you can replace the worn seal by hand within seconds.
You can use the spare one supplied with the kit. Alternatively you can buy as many from any of the distributors or retailers. This patented high friction foam-rubber seal fits all GRABO models.
SPEC SHEET
SHOP NOW
  • Foam for Glass suction cup lifter
  • GRABO tile vacuum lifter foam
  • Vacuum plate lifter GRABO foam

Specifications:

Black foam seal
Material SBR rubber foam sponge
Color Black
L x W x H 11.5 x 6.9 x 0.7” (293 x 175 x 19 mm)
Density 10.6 Lb/cft (170 kg/m^3)
Hardness, Shore C 10_2
Tearing Pressure 1800 Psi (126 kg/cm^2)
Compression to 25% size at 8.5 Psi (6000 kg/m^2)
Water Absorption, % <=5
Shrinkage at 160F (70C) for 24 hrs, % <=20
Recommended Storage Temperature Room temperature
Red seal
Material Silicon Foam
Color Red
Density 40.5 Lb/cft (650 kg/m^3)
Hardness, Shore C 55_5
Water Absorption, % <=4
Recommended Storage Temperature Room temperature

Become a GRABO Insider

Want the latest news on new GRABO electric lifter technology?
Get access to priority updates and other exciting bonuses now.
GRABO INSIDER