Nemo GRABO
The electric suction cup
The Nemo GRABO is a revolutionary tool that is changing the way we carry heavy items. Nemo GRABO can lift up-to 375Lbs!
GRABO quality certificates of conformity
The Nemo GRABO can grab almost any material!
These are some of the materials the Nemo GRABO can work with:
- Glass.
- Dry Wall.
- Laminated cardboard.
- Plastics of all types.
- Wood, both rough and smooth.
- Metals. The GRABO has no challenge picking up metal with diamond plate or other uneven patterned surfaces.
- Tiles, smooth and patterned/uneven surfaces.
- GRABO works great with concrete, paving stones, granite and other less porous stones.
![GRABO suction cup lifts concrete pavers]()
Concrete tiles![Ribbed glass lifted by the GRABO lifter]()
Ribbed glass![GRABO-lifter suction cup lifts Flagstone]()
Natural stone![Suction lifter GRABO for Marble]()
Marble![Texture Plates electric cup lifter]()
Texture plates![GRABO Vakuum lifter lifts Beton]()
Concrete![GRABO suction equipment lifts wood]()
Wood![GRABO cup on DryWall]()
Drywall![GRABO Metal vacuum lifting device]()
Metal![Patterned steel lifted by mobile vacuum lifter]()
Checker Plate![Vacuum holder lifts CobbleStone]()
Cobblestone![Moving suction cup on Cement tile]()
Cement Tile
The maximum weight a Nemo GRABO can hold depends on two things:
- The way you are carrying the material.
- They type of material you are carrying.
There are two ways you can use the Nemo GRABO to carry material. Perpendicular ?and Parallel ?
Different shapes and sizes of items will need a different approach, so the GRABO is designed to give you a firm and safe hold from both angles.
You also need to consider the weight of what you’re lifting to use the GRABO safely. This chart provides you with the safe guidelines for carrying the main materials you will find yourself using with GRABO technology.
 |
Perpendicular Hold
 |
Parallel Hold
 |
|---|---|---|
| Glass | 375Lbs (170 kg) | 265Lbs (120 kg) |
| Ceramic Tiles | 375Lbs (170 kg) | 265Lbs (120 kg) |
| Metal | 242Lbs (110 kg) | 242Lbs (110 kg) |
| Plastic | 220Lbs (100 kg) | 220Lbs (100 kg) |
| Wood | 220Lbs (100 kg) | 143Lbs (65 kg) |
| Rough Slate | 176Lbs (80 kg) | 176Lbs (80 kg) |
| Rough Concrete | 176Lbs (80 kg) | 176Lbs (80 kg) |
| Dry Wall | 165Lbs (75 kg) | 143Lbs (65 kg) |
Nemo GRABO is Easy to use!
Simply do the following:
- Place the GRABO on the item that you want to move.
- Press the green button to activate the vacuum. Once the vacuum is activated it creates a strong suction allowing it to easily stick to any non-porous surface.
- Smoothly lift the item and move it to where you want to place it. For maximum lift, the vacuum can stay activated even while you are moving your item. The rubber-protected pressure gauge will allow you to always monitor the vacuum pressure level.
- Press the red button to release the item.
Using the Nemo GRABO improves efficiency and safety for you and your team.
Watch Demonstration VideoNOTICE: Due to the high pressure that is created with GRABO we strongly recommend that you do not attempt to attach GRABO to glass thinner than 6mm thick. Damage can occur to glass that is thinner than 6mm thick.
Specifications
GRABO Comparison Chart| Model/SKU | Nemo GRABO / NG-2B-FB |
|---|---|
| Battery | 14.8VDC 2600mAh Li-ion |
| Rated Power | 16W |
| Charger Input Voltage | 100-240VAC 50/60Hz |
| Battery Charging Time | ~2hrs |
| Non-Stop Running Time (Full Charge) | 1.5hrs |
| Running Cycles (On Full Charge) | 900 ON-OFF cycles of 10 seconds |
| Stand-by Mode (Charge Hold) | 30 days |
| Pump Service Life | 100000+ ON-OFF cycles / 800+ hrs continuous |
| Rated Air Flow | 0.7cfm (20 L/min) |
| Maximum Vacuum Rate | 11.6Psi (0.8 Bar, 80 kPa) |
| Maximum Lifting Capacity | 375Lbs (170 kg) |
| L x W x H | 12.1 x 7.37 x 4.91” ( 297 x 181 x 121 mm ) |
| Net Weight (With Battery) | 3.3Lbs (1.6 kg) |
| Working Temperature | 32°F~140°F ( 0°~60 °C ) |
| Applicable Surface Type | Peak/valley heights less than 0.1” (3mm), arc less than 5° |
Become a GRABO Insider
Get access to priority updates and other exciting bonuses now.
