An Introduction to Suction Vacuum Slab Lifters
As trends develop in the construction industry, more designers are moving away from subway tiles and four-inch blocks in favor of large sheets of ceramic tile, granite, or stone for kitchens and bathrooms. While these materials are durable and aesthetically pleasing, they are more difficult to install than the smaller tiles.
The primary reason for the difficulty is the size and weight of these sheet materials. It will take a minimum of two workers, and possibly more, to move a large sheet of granite by hand. Not to mention the danger of worker injury, or possible destruction of the piece if dropping occurs.
A suction vacuum slab lifter, such as the GRABO Nemo, makes the handling process faster, easier, and safer.
What Are Suction Vacuum Slab Lifters?
An electric suction vacuum lifter is a pneumatic device designed to lift heavy objects. The battery-operated electric pump has a durable, rubberized seal that creates a vacuum effect between the slab of material and the device. This vacuum allows the air-tight seal of the device to form a suction bond with the surface of the material. This bond remains in place until the operator switches the device off. This allows the worker to pick up and carry heavy or awkward materials easily, often with one hand.
These products are safer and more efficient than most manual lifting methods, including chain hoists and rope pulleys. The worker can then use the handle on the device to move the slab from place to place. The air-tight bond remains in place for up to 90 minutes on most non-porous surfaces.
A suction vacuum lifter like the GRABO Nemo can handle large sheets of tile or countertop materials. Granite, marble, polymer, ceramic, and glass are common slab materials used in new construction projects. The durability and beauty of these types of surfaces make them highly desired by homeowners. The downfall of these materials is the size and weight of the tiles. The suction lifter makes moving these objects easy.
In particular, granite and marble are expensive, heavy, and fragile materials. These are also some of the most requested materials in luxury home designs and upscale commercial buildings. The GRABO Nemo suction vacuum lifter allows a single worker to lift up to 200 pounds of polished marble or granite material with one hand. This makes it more cost effective to work with these materials.
Ceramic floor and wall tiles never go out of style in residential and commercial building. Larger pieces are now being incorporated into designs. Even though it looks great, it is difficult to handle. The edges are sharp, it chips and cracks easily, and carrying one sheet requires two individuals to work together to place it exactly. A suction vacuum lifter makes the job much easier. One man can carry and place the full tile sheet using the GRABO Nemo.
Not only is the device perfect for new builds, but it is valuable for teardowns and demolition as well. A single worker can carry broken up concrete, wallboard, and countertop off the job site with ease. The number of workers required is lessened, and the work goes much faster.
Benefits of using a Suction Vacuum Slab Lifter
A vacuum lifter like the GRABO Nemo offers many benefits to construction crews. Not only will it reduce the number of workers needed for the job, but it will also reduce accidents that lead to employee absence, insurance claims, and workers’ compensation claims.
Because the suction vacuum lifter allows an individual worker to carry an unwieldy slab with ease. It is no longer necessary to have two to four people assigned to materials placement.
One of the most common injury claims among construction workers is back injury. Often, the cause of this injury is improper bending and lifting. Using a vacuum lifter reduces the inclination to bend over and lift with the back instead of the knees. The result is fewer back injuries among workers.
Other common injuries among stone workers and tile setters are cut and smashed fingers. Sharp tile edges can easily cut glove free hands. Pinched fingers are common as tiles are lowered into place. Heavier stones such as marble or granite are more likely to cause smash injuries. Using the vacuum lifter will help keep these injuries to a minimum.
Another benefit of using a suction vacuum lifter is the ability to speed up the job. Manual methods of moving heavy slabs can involve wrapping ropes around the slab, attaching a hook, and lifting the slab. There are a couple of problems that can arise during this process. The rope might loosen or slip, the material might be too heavy and cause the chain to break, or the slab may swing and sway which can cause breakage or cracking.
Vacuum suction lifters, such as the GRABO, are becoming commonplace among construction crews. Not only do these devices create a safer work environment, but workers are inspired to do better work when it is not as physically damaging. This creates a positive work environment and productivity goes up.
Jobs become faster and easier. Workers can be used in different roles, rather than having three or four laborers assigned just to preparing and carrying materials. What was previously the job of two or three workers can now be handled by a single guy.
Less sick time and accidents also lead to faster production and job completion. Using the vacuum suction lifter prevents repetitive movement accidents caused by improper lifting and straining. Insurance and workers’ compensation claims decrease because there are fewer injuries and broken bones. This translates into more profit for the company.
A high-quality vacuum suction lifter, such as the GRABO Nemo, can also save money on equipment and supplies. A one-day rental of a forklift or crane can cost hundreds of dollars, but the GRABO Nemo can eliminate the need for heavy equipment.