+1 (844) 430-0510 Info@GRABO.com

Guidance on the safe use of Probst vacuum slab lifter 

Probst has been the solution provider for handling systems for landscaping materials and constructions all over the world. Probst vacuum slab lifters are designed to help professionals work safely and more productively. Probst vacuum lifters are so standard because of their continual innovation, which has established their position as the market leader. Probst vacuum lifters are an extremely useful and handy tool. However, they must be used safely. Here's a quick overview of the general rule for the safe use of vacuum lifting equipment. 



Inspect suction pad 


Vacuum lifters are made of suction pads and should create a perfect seal in other to prevent pressure drop. Before using a lifter, inspect the suction pad to ensure they are in reasonable consideration. Suction pads are susceptible to deterioration or tear with time, primarily when used on a rough surface or exposed to simple environmental factors like UV rays. Suction pads can also get hardened with time, causing them not to hold as much pressure as possible. Using a damaged pad is dangerous as it can cause the load to fall unexpectedly. 


The pressure gauge must be functional. 


Another feature that will help you safely use a vacuum lifter is the pressure gauge. Vacuum lifters that come with a pressure gauge are the best. You can know the pressure of a vacuum lifter with a pressure gauge when attached to a load. As such, you wouldn't ever make the mistake of securing a vacuum lifter at too high or low pressure. To ensure everything is in place before using a lifter, inspect the lifter's pressure gauge and make sure it is functional. 


Inspect all electronic connections 


Not all Probst vacuum lifters are manual. Most times, professionals use an electronic Probst vacuum lifter to transport back-breaking load. If you own an electronic vacuum lifter, it's crucial to inspect electronic connections before using it. To avoid short-circuit, ensure the wires are not crossing each other and are where they ought to be. Similarly, ensure there's a circuit breaker in place to protect the electronic circuit of the lifter. Likewise, inspect the motor, switches, and other electronic parts of the lifter for apparent damage. 


 



 


If featured, check that rotation and tilt works. 


Not all, but some vacuum lifter comes with the ability to rotate and tilt. This feature is beneficial as it helps make transporting heavy-duty load easier. This feature is quite helpful as such lifters can be used with hoist equipment like lightweight cranks, forklifts, and so on to lift glass sheets and other materials. Nevertheless, it is vital to check the lift's rotating and tilting function to ensure they work properly. 


If the machine features hydraulic, check the rams and pipes are free of leaks or damage. 


Some vacuum lifts feature hydraulics. The hydraulic ram is a single-acting cylinder that creates fluid pressure. Before using a vacuum lifter, it's essential to inspect the rams and pipes for safety. If the ram is damaged or the pipes are leaking, the vacuum lift would not create or hold as much pressure as it should. 


Check the battery charge level. 


Some vacuum lifters are battery-powered. The advantage of this is that it makes the tool very portable and compact. However, while these battery-powered vacuum slab lifters are pretty helpful, it is essential always to check the battery charge level. Having the battery give out while working is not going to be productive. As such, ensure to check the battery level of the lifter before commencing any task. The battery level must be above 25%. If the battery is not charged correctly, recharge it before use. 


Ensure lifter is suitable for the load 


Under no circumstance should you use a lifter to carry a load beyond the lifter's load-bearing capacity. When you use a lifter to carry a burden beyond its capacity, anything can happen; the lifter could be damaged, or the load could be dropped mid-way. Whenever you're using a vacuum lifter, it is best to use it to lift a load that is 5% less than the maximum load-bearing capacity. 


Handle durability 


The durability of the handle is another factor to consider for the safe use of a lifter. First, the handle should be constructed with durable material that can withstand the load you are trying to carry. Also, inspect the handle to ensure there are no cracks. Notably, the handle should come with ergonomic grips to prevent slippage. 


Inspect the load is free of any damage 


While it's important to ensure the lifter is in reasonable working consideration, it is equally important to consider the load itself. Before transporting load with vacuum lifters, inspect the load for any damage. If the load is damaged or broken, using a vacuum lifter to transport it puts you in harm's way, considering the load can fall and injure you. 



Personal safety 


Lastly, your safety shouldn't be compromised. Wear protective gloves when using a vacuum lifter to prevent blisters or give you a better grip on the lifter handle. Construction boots are also important to keep your feet safe from injury in the worksite. Helmets should also be on as well as other personal protective equipment. 


Verdict


In conclusion, when using a Probst vacuum slab lifter, it is crucial to follow all the safety rules. Following this guidance in this post on the safe use of a vacuum lifter will keep you and the work environment safe and accident-free. If you have any questions about the safe use of vacuum slabs, feel free to drop a comment in the comment section below. 

probst vacuum slab lifter
Guidance on the safe use of Probst vacuum slab lifter