Proper handling of a vacuum lifter for stone slabs starts way before you begin lifting or moving slabs. There are numerous things that you have to ensure are in place before you consider unloading, storing, and accepting slabs in your yard or shop. In the following paragraphs, we'll first look at what a vacuum lifter for stone slabs is
Vacuum lifter for stone slabs
To unload and move slabs around your commercial or industrial work area, you'll need a vacuum lifter for stone slabs that's capable of lifting and moving these heavy pieces of stone. one stone slab can weigh up to 1000 lbs. It is highly recommended that you rent or purchase a vacuum lifter for stone slabs with a minimum weight capacity of five tons. You might be asking yourself, "why do I need such an enormous capacity vacuum lifter for stone slabs that only weighs half a ton?
Vacuum lifters for stone slabs are rated at what proportion they lift while the slabs are on the bottom. This implies that as the slab is lifted, the vacuum lifter's capacity for stone slabs to lift further decreases. Suppose you intend to raise a slab and place it over another slab of a truck or onto a table. In that case, you'll need a lifter with a considerable capacity.
Vacuum lifters for stone slabs vary in price depending on their capacity. These lifting devices use suction cups powered by an air pump mounted to the vacuum lifter for stone slabs. These lifters are great if you do not have a tilting table since they permit you to line the stone down flat on a table.
Confirm you purchase the suitable lifter for the sort of stone you're handling. Some vacuums won't work on honed or flamed stone. Be careful as well when the stone is wet since the suction cups may fail. Many lifters now accompany alarms, which will warn you when a cup is close to dying. The vacuum lifter for stone slabs is often mounted to a boom or an overhead crane, or jib crane. When purchasing a boom for your vacuum lifter for stone slabs, confirm it's rated, and there's a sticker that lists the capacity.
Hand-Held vacuum lifters for stone slabs are designed for you if you have the power to handle them. They can also manage or move a small slab or smaller pieces of stone by hand.
Tips for safety when using a vacuum lifter for stone slabs
The following are some additional tips for vacuum lifter for stone slabs safety:
All vacuum lifters for stone slabs operators should be certified in vacuum lifters for stone slabs safety training. Various training is out there from many vacuum lifters for stone slabs dealers and independent safety companies.
The vacuum lifter for stone slabs should be equipped with a fire extinguisher and a safety belt.
You should perform a security check a day. Walk around the vacuum lifter for stone slabs and check the following:
- The tires for damage and proper inflation
- The mast is in a proper position.
- The chains are in good shape.
- The rollers for wear or tear
- hydraulic hoses
Storing stone slabs
It is pretty appalling that many operators do not store their slabs safely. There are more accidents from improper storage. There are several ways to keep slabs when they are not in use. You can either use an A-frame or a vertical storage rack. When using an A-frame to store slabs, the following things should be noted:
- Frames should be constructed so that the slabs rest at an angle to prevent tipping over.
- Slabs should be strapped to the A-frame and secured.
- It is highly recommended that the a-frames be anchored and glued.
- The maximum load capacity of every A-frame should be marked and displayed.
- The A-frames should be spaced, so that removal of slabs are often accomplished without hitting other A-frames
- Slabs should be stored on A-frames evenly.
- A-frames should be inspected daily for the following conditions.
- Splits in wooden supports
- Cracked Welds
- Slab Handling Equipment
- Cracked structural members
- Deformed or bent structural members
There are many devices available today for lifting and moving slabs. One of the most popular ones is a vacuum lifter for stone slabs.
The device works by pinching the slab because it is being lifted. The vacuum lifter for stone slabs is designed to lift one slab at a time. Although some people might attempt to lift two or more, this is often a grave mistake and could result in a fatal accident. Care must be taken to examine the vacuum lifter for wear, and at no time should anyone be under the slab because it is lifted or moved.
Regardless of whatever type of vacuum lifter you decide to use for stone slabs, please ensure that safety comes as your priority. This safety is not just of the people on-site but of properties as well.